
Installing a drive
Depending on the server model, one or more of the following drives might be installed in the server:
vDiskette drive (optional)
vHard disk drive
vCD-ROM, CD-RW, or DVD/CD-RW combo drive
Some hot-swap Serial Attached SCSI (SAS) models might come with an integrated drive electronics (IDE) CD-ROM drive in bay 1 and four hot-swap hard disk drive bays.
Some simple-swap Serial Advanced Technology Attachment (SATA) models might come with an IDE CD-ROM drive in bay 1 and a simple-swap SATA hard disk drive in bay 4.
Some non-hot-swap SATA models might come with an IDE CD-ROM drive in bay 1 and a non-hot-swap SATA hard disk drive in bay 4.
Some hot-swap SATA models might come with an IDE CD-ROM drive in bay 1 and a hot-swap SATA hard disk drive in bay 4.
The following illustration shows the drive bays.
Bay 1
Bay 2 
Bay 3
Bay 4 

Bay 5
Bay 6
Bay 7
The following notes describe the types of drives that the server supports and other information that you must consider when installing a hard disk drive:
vMake sure that you have all the cables and other equipment specified in the documentation that comes with the drive.
vSelect the bay in which you want to install the drive.
16xSeries 206m Types 8485 and 8490: Installation Guide