IBM AA-RWF3A-TE Regulatory compliance identification numbers, Laser device, Modifications, Cables

Modifications

The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett-Packard Company my void the user’s authority to operate the equipment.

Cables

Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods in order to maintain compliance with FCC Rules and Regulations.

Regulatory compliance identification numbers

For the purpose of regulatory compliance certifications and identification, your product has been assigned a unique Regulatory Model Number. The RMN can be found on the product nameplate label, along with all required approval markings and information.

When requesting compliance information for this product, always refer to this RMN. The Regulatory Model Number should not be confused with the marketing name or model number of the product.

The Regulatory Model Number for the 4/8 and 4/16 SAN Switches is HSTNM-N005. The Regulatory Model Number for the 4/32 SAN Switch is HSTNM-N003.

The Regulatory Model Number for the 4/32B SAN Switch is HSTNM-N012. The Regulatory Model Number for the 4/64 SAN Switch is HSTNM-N008.

Laser device

All HP systems equipped with a laser device comply with safety standards, including International Electrotechnical Commission (IEC) 825. With specific regard to the laser, the equipment complies with laser product performance standards set by government agencies as a Class 1 laser product. The product does not emit hazardous light.

Laser safety warning

WARNING!

To reduce the risk of exposure to hazardous radiation:

•Do not try to open the laser device enclosure. There are no user-serviceable components inside.

•Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified herein.

•Allow only HP authorized service technicians to repair the laser device.

114 Regulatory compliance and safety