IBM AA-RWF3A-TE manual Securing the switch to the outer rails

NOTE:

Figure 17 illustrates how to attach the plenum to the 4/8 or 4/16 SAN Switch specifically. If installing the plenum on the 4/32B SAN Switch, the procedure and figure also applies.

3

MATTEax	NTI
mountiminugmtscrOe N:
	obew5leng
	mmothrforr
	13/6ack4in.

1

2

OII OI

25052a

Figure 17 Attaching the Plenum to the 4/8 or 4/16 SAN Switch

1. Plenum	2. SAN Switch
3. Two screws for attaching plenum to rails

Securing the switch to the outer rails

To secure the switch to the outer rails:

1.Insert the switch with the attached inner rails into the outer rails.

NOTE:

This step applies to installing a switch in HP 9000 Series, HP 10000

Series or HP System/e racks.

2.Insert the device into the rack and install (2) #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers with one on each side. See Figure 18 and Figure 19.

50 Installing and configuring SAN Switches