IBM AA-RWF3A-TE 4/32 SAN Switch port side LED patterns, LED name, LED color, Hardware status

Table 13 describes the 4/32 SAN Switch port side LEDs.

Table 13 4/32 SAN Switch port side LED patterns

LED name	LED color	Hardware status	Recommended action
Power Status	No light	Switch is off or there is an internal	Verify that the system is on. If the
		power supply failure.	system is on, the unit is faulty.
			Contact HP Technical Support.
	Steady green	Switch is on and power supplies	No action required.
		are functioning properly.
System Status	No light	System is off, boot is not complete,	Verify that the system is on and
		or boot failed.	has finished booting.
	Steady green	System is on and power supplies	No action required.
		are functioning properly.
	Steady Amber	Boot failed and system is faulty.	Connect a serial cable to the
	(for more than		system.
	5 seconds)		Reboot the system.
			Check the failure indicated on
			the system console.
			Contact HP Technical Support.
	Flashing amber	A number of things can cause this	Check the management interface
	or green	status, including a single power	and the error log for details
		supply failure, a fan failure, or an	on the cause of the status.
		environmental problem.	Contact HP Technical Support,
			if necessary.
Ethernet Speed	No light	Port speed is 10 Mb/s.	No action required.
	Steady green	Port speed is 100 Mb/s.	No action required.
Ethernet Link	No light	There is no Ethernet link.	Verify that the Ethernet cable is
			connected correctly.
	Steady amber	There is no Ethernet link.	No action required.
	Flashing amber	There is link activity (traffic).	No action required.
	or no light
Port Speed	No light	Port is transmitting or receiving at	No action required.
		1 Gb/s.
	Steady green	Port is transmitting or receiving at	No action required.
		2 Gb/s.
	Steady amber	Port is transmitting or receiving at	No action required.
		4 Gb/s.

76 Managing SAN Switches