IBM CI5VGM Series user manual IDE HDD Auto Detection, Esc Skip

Chapter 3 BIOS Configuration

IDE HDD Auto Detection

This option detects the parameters of an IDE hard disk drive, and automatically enters them into the Standard CMOS Setup screen.

ROM PCI/ISA BIOS

STANDARD CMOS SETUP

AWARD SOFTWARE, INC.

HARD DISKS		TYPE	SIZE	CYLS		HEAD PRECOMP LANDZ SECTOR					MODE
Primary Master:
			Select Primary Master Option (N=SKIP) : N
	OPTIONS	TYPE	SIZE	CYLS	HEAD		PRECOMP	LANDZ	SECTOR		MODE
	1 (Y)	0	0	0		0	0	0	0	NORMAL

NOTE: Some OSes (like SCO-UNIX) must use ”NORMAL” for installation

ESC: SKIP

Up to four IDE drives can be detected, with parameters for each appearing in sequence inside a box. To accept the displayed entries, press the “Y” key; to skip to the next drive, press the “N” key. If you accept the values, the parameters will appear listed beside the drive letter on the screen.

CI5VGM User’s Manual 63