
Chapter 3 BIOS Configuration
IDE Primary/Secondary Master/Slave UDMA
These fields allow your system to improve disk I/O throughput to 33Mb/sec with the Ultra DMA/33 feature. The options are Auto and Disabled.
Init AGP Display First
This field allows the system to initialize first the VGA card in the AGP slot on the motherboard when system is turned on.
Onboard Audio Chip
Select Enabled to use the integrated audio chip on the motherboard.
Onboard FDD Controller
Select Enabled if your system has a floppy disk controller installed on the system board and you wish to use it. If you install an
Onboard Serial/Parallel Port
These fields allow you to select the onboard serial and parallel ports and their addresses. The default values for these ports are:
Serial Port 1 | 3F8/IRQ4 |
Serial Port 2 | 2F8/IRQ3 |
Parallel Port | 378H/IRQ7 |
UART 2 Mode
This field determines the UART mode in your computer. The settings are Normal, IrDA and ASKIR. The default value is Normal.
Parallel Port Mode
This field allows you to determine parallel port mode function.
SPP | Normal Printer Port |
EPP | Enhanced Parallel Port |
ECP | Extended Capabilities Port |
CI5VGM User’s Manual | 61 |