IBM P96 1? (reset) button (page 15), 2(auto sizing and centering) button (page 5), 3Input 1-2switch (pages 5), 4¬ (brightness) down and up (./>) buttons (pages 6 – 15)

Identifying Parts and Controls

See the pages in parentheses for further details.

Front

1 2

1? (reset) button (page 15)

Resets the adjustments to the factory settings.

2 (auto sizing and centering) button (page 5)

This button automatically adjusts the size and centering of the picture.

3Input 1-2 switch (pages 5)

This switch selects the INPUT 1 (Video input 1 connector) or INPUT 2 (Video input 2 connector).

4¬ (brightness) down and up (./>) buttons (pages 6 – 15)

Adjust the picture brightness.

Function as the (./>) buttons when adjusting other items.

5 (menu) button (pages 6 – 15, 17)

Displays the MENU OSD.

6> (contrast) left and right (?//) buttons (pages 6 – 15, 20)

Adjust the contrast.

Function as the (?//) buttons when adjusting other items.

7u (power) switch and indicator (pages 16, 20)

Turns the monitor on or off.

The power indicator lights up in green when the monitor is turned on, and either flashes in green and orange, or lights up in orange when the monitor is in power saving mode.

Getting Started

Rear

8 AC IN connector (page 4)
	EN
Provides AC power to the monitor.
9 Video input 1 connector (HD15) (page 4)
Inputs RGB video signals (0.700 Vp-p, positive) and
SYNC signals.

		1	2	3	4	5
	6	7	8	9	10
	11 12			13 14		15
Pin No.	Signal			Pin No.			Signal
1	Red			8			Blue Ground
2	Green			9			—
	(Sync on Green)			10			Ground
3	Blue
				11			ID (Ground)
4	ID (Ground)
				12			Bi-Directional
5	DDC Ground*						Data (SDA)*
6	Red Ground			13			H. Sync
7	Green Ground			14			V. Sync
				15			Data Clock(SCL)*

*Display Data Channel (DDC) Standard of VESA

!¼Video input 2 connector (HD15) (page 4)

Inputs RGB video signals (0.700 Vp-p, positive) and SYNC signals.

See the above table for the pin assignment.

3