IBM P96 Centering the Picture, Automatically Sizing and, Selecting the Input Signal, Note, 1• •2, Notes, Press the button, Move the Input 1-2switch

Selecting the Input Signal

You can connect two computers to this monitor using the video input 1 and video input 2 connectors. To select one of the two computers, use the Input 1-2 switch.

Move the Input 1-2 switch.

The selected connector appears on the screen for 3 seconds.

1• •2

“INPUT 1” (video input 1 connector) or “INPUT 2” (video input 2 connector) appears on the screen.

Note

If no signal is input to the selected connector, NO INPUT SIGNAL appears on the screen. After a few seconds, the monitor enters the power saving mode. If this happens, switch to the other connector.

Automatically Sizing andCentering the Picture

You can easily adjust the picture to fill the screen by pressing the (auto sizing and centering) button.

Press the button.

The picture automatically fills the screen.

Notes

•This function is intended for use with a computer that provides a full-screen picture. It may not work properly if the background color is dark or if the input picture does not fill the screen to the edges.

•Pictures with an aspect ratio of 5:4 (resolution: 1280 ⋅ 1024) are displayed at their actual resolution and do not fill the screen to the edges.

•The displayed image moves for a few seconds when the button is pressed. This is not a malfunction.

Getting Started

EN

5