IBM P96 Press the, Press the, Press the, Press the, 1Press the button, 1Press the button, Example of moire:, POSITION)” or “(OSD V POSITION).”

Customizing Your Monitor

Adjusting the moire

If elliptical or wavy patterns appear on the screen, adjust the moire cancellation level.

1Press the button.

The MENU OSD appears.

2Press the ./>buttons to select “ OPTION” and press the button again.

The OPTION OSD appears.

OPT I ON

DEGAUSS

ON

Changing the on-screen display position

You can change the OSD position (for example, when you want to adjust the picture behind the OSD).

1Press the button.

The MENU OSD appears.

2Press the ./>buttons to select “ OPTION” and press the button again.

The OPTION OSD appears.

OPT I ON

DEGAUSS

ON

3Press the ./>buttons to select “ MOIRE* ADJUST.”

OPT I ON

MO I RE

AD J US T

2 6

4Press the ?//buttons to adjust the amount of moire cancellation until the moire effect is at a minimum.

*Moire is a type of natural interference which produces soft, wavy lines on your screen. It may appear due to interference between the pattern of the picture on the screen and the phosphor pitch pattern of the monitor.

Example of moire:

Press the button once to return to the MENU OSD, and twice to return to normal viewing. If no buttons are pressed, the OSD closes automatically after about 30 seconds.

To reset, press the ?(reset) button while the OSD is on.

3Press the ./>buttons to select “ (OSD HPOSITION)” or “ (OSD V POSITION).”

Select “ (OSD H POSITION)” to adjust the horizontal position.

OPT I ON

OSD H

POS I T I ON

2 6

Select “ (OSD V POSITION)” to adjust the vertical position.

OPT I ON

OSD V

POS I T I ON

2 6

4Press the ?//buttons to move the OSD to the desired position.

Press the button once to return to the MENU OSD, and twice to return to normal viewing. If no buttons are pressed, the OSD closes automatically after about 30 seconds.

To reset, press the ?(reset) button while the OSD is on.

12