IBM P96 Using the GEOMETRY On- screen Display, For, Select, Press the, Press the, Press the, 1Press the button, 4Press the ?//buttons to adjust the settings

Customizing Your Monitor

Using the GEOMETRY On- screen Display

The GEOMETRY settings allow you to adjust the shape and orientation of the picture.

Once the (Rotation) is adjusted, it will be stored in memory for all input signals received. All other adjustments will be stored in memory for the current input signal.

1Press the button.

The MENU OSD appears.

2Press the ./>buttons to select “ GEOMETRY” and press the button again.

The GEOMETRY OSD appears.

GEOMETRY

2 6

3Press the ./>buttons to select the item you want to adjust.

Select	To
(Rotation)	adjust the picture rotation
(Pincushion)	adjust the picture sides
(Pin Balance)	adjust the picture side balance
(Keystone)	adjust the picture width
(Key Balance)	adjust the picture shape balance

4Press the ?//buttons to adjust the settings.

For	Press
(Rotation)	/. . . to rotate the picture clockwise
	?. . .	to rotate the picture counterclockwise
(Pincushion)	/. . .	to expand the picture sides
	?. . .	to contract the picture sides
(Pin Balance)	/. . . to expand the picture sides to the
		right
	?. . .	to expand the picture sides to the left
(Keystone)	/. . . to increase the picture width at the
		top
	?. . . to decrease the picture width at the
		top
(Key Balance)	/. . . to move the top of the picture to
		the right

?. . . to move the top of the picture to the left

Press the button once to return to the MENU OSD, and twice to return to normal viewing. If no buttons are pressed, the OSD closes automatically after about 30 seconds.

To reset, press the ?(reset) button while the OSD is on. The selected item is reset to the factory setting.

8