IBM P96 Using the SIZE/CENTER On- screen Display, Note, SelectTo, SelectTo, 1Press the button, 4Press the ?//buttons to adjust the settings

Using the SIZE/CENTER On- screen Display

The SIZE/CENTER settings allow you to adjust the picture’s size, centering, or zoom.

Once the setting is adjusted, it will be stored in memory for the current input signal.

1Press the button.

The MENU OSD appears.

2Press the ./>buttons to select “ SIZE/CENTER” and press the button again.

The SIZE/CENTER OSD appears.

S I ZE / CENTER

2 6

3Press the ./>buttons to select the item you want to adjust.SelectTo

(Horizontal Centering) adjust the horizontal centering of the picture

(Vertical Centering)	adjust the vertical centering of the
	picture
(Horizontal Sizing)	adjust the horizontal size of the
	picture
(Vertical Sizing)	adjust the vertical size of the picture
(Zoom)	enlarge or reduce the picture

Customizing Your Monitor

4Press the ?//buttons to adjust the settings.

SelectTo

(Horizontal Centering) /. . . to move the picture right

?. . . to move the picture left

(Vertical Centering) /. . . to move the picture up

?. . . to move the picture down

(Horizontal Sizing) /. . . to increase picture width

?. . . to decrease picture width

(Vertical Sizing)	/. . .	to increase picture height
	?. . .	to decrease picture height
(Zoom)	/. . .	to enlarge the picture
	. . .?	to reduce the picture

Press the button once to return to the MENU OSD, and
twice to return to normal viewing. If no buttons are pressed,
	EN
the OSD closes automatically after about 30 seconds.

To reset, press the ?(reset) button while the OSD is on. The selected item is reset to the factory setting.

Note

The (Zoom) adjustment stops when the horizontal or vertical size reaches its maximum or minimum value. The horizontal adjustment value is not displayed in the menu.

7