IBM X.25 manual PCI Co-Processor Adapter Diagnostics Test

PCI Co-Processor Adapter Diagnostics Test

Notes:

1.You can test the PCI co-processor adapter with or without the 37-pin wrap plug (shown in “Service Parts” on page 4-22). The

wrap plug lets you test the electrical interfaces.

2.If at any time during diagnostics testing, you get a screen with non-decipherable data, see the steps under “Blank Screen,

Blinking Cursor, or Non-Decipherable Data” on page 4-5. Otherwise, follow the step-by-step procedures.

3. If you	receive an error message during any of the tests, record
the error message and have the system unit serviced, unless
otherwise	stated.

During diagnostics testing, instructions appear on the screen. Follow the instructions as they appear.

Problem Determination Procedures4-3