IBM Realtime Control Microcode (ICAAIM.COM)
ICAAIM.COM is the RAM-resident control program for the PCI
co-processor adapter and is supplied with the Realtime Interface
Co-Processor Support Program for your operating system.
ICAAIM.COM is loaded automatically onto the adapter by either
the IBM X.25 Co-Processor Support Program or the IBM
Communications Manager/2 product. ICAAIM.COM optionally
can be loaded using the Application Loader Utility of either the
Realtime Interface Co-Processor DOS Support or the Realtime
Interface Co-Processor OS/2 Support program.
See Appendix A, “Special Configuration Information” for important
setup information on creating an ICAPARM.PRM file and changing
the CONFIG.SYS file. The changes are necessary for the correct
operation of your PCI co-processor adapter.
Step 3: Run Diagnostics to Verify Installation
Before you continue with the following procedure, see “PCI
Co-Processor Adapter Diagnostics Test” on page 4-3 to test the PCI
co-processor adapter in an Intel-based, IBM-compatible system. See
“Step 2. Download the Diagnostics and Operating System Support
Programs” on page 2-5 for information on downloading diagnostics
for other supported system unit hardware platforms.
Installation 2-7