IBM X.25 manual Set the Power switch on the system unit to Off

1. Set the Power switch on the system unit to Off.

2.Insert your copyIBMof Realtimethe Interface Co-Processor: Advanced Diagnosticsdiskette into diskette drive A.

3. Set the Power switch on the system unit to On.

A screen similar to the following should appear.

à ð

IBM REALTIME INTERFACE CO-PROCESSOR

AND X.25 INTERFACE CO-PROCESSOR

ADVANCED DIAGNOSTICS

Version X.XX (C) Copyright IBM Corp 19XX

SELECT AN OPTION

ðRUN DIAGNOSTIC ROUTINES

9 EXIT TO SYSTEM DISKETTE

	ENTER THE ACTION DESIRED
?
á		ñ
DOES YOUR SCREEN LOOK SIMILAR		TO THIS ONE?

NO If you have a blank screen, a blinking cursor, or non-decipherable data, continue to the next page. Otherwise, repeat the diagnostics for your personal computer system to verify that your system unit is functioning correctly. If your system unit is functioning correctly,IBM Realtimeyour

Interface Co-Processor: Advanced Diagnosticsdiskette may be defective.

YES Press 0 (RUN	DIAGNOSTIC	ROUTINES); then press Enter
and continue	on page	4-5.

4-4X.25 Co-Processor PCI GTO