IBM X.25 manual Co-Processor Adapter Removal

Co-Processor Adapter Removal

Note: The following steps are an example of co-processor adapter removal. For specific adapter removal instructions, consult your IBM Personal Computer Hardware Maintenance and

Service book or your IBM Industrial Computer Maintenance Information manual for the computer you are servicing.

1. Set all power switches to Off.

2. Unplug the power cords from the wall outlets.

3. Remove	the cable-retaining brackets from the rear of the system
unit and	display.

4. Disconnect all cables from the rear of the system unit.

5. Use a flat-blade screwdriver or 1/4-inch nutdriver to remove the cover mounting screws from the rear of the system unit.

6.Remove the system-unit cover.

7.Open the card retainer by loosening the screw.

4-18X.25 Co-Processor PCI GTO