Icom iC-706MKTMG manual Mode selection, Quick band change function, Operating Mode Selection

3 FREQUENCY SETTING

• Quick band change function

The quick band change function automatically stores the last frequency and mode used for each band in a band stacking register. This is convenient for contest operation, etc. The tables below show the quick band change default settings for each band.

➀Select S3.

•Push [DISPLAY] when M or G is displayed.

•Push [MENU] twice to select S3.

➁Push [F-1]–[F-3] to select a band stacking register.

•The default settings for [F-1]–[F-3] are 7, 144 and 430 MHz bands, respectively.

➂To change the settings for [F-1]–[F-3] from their defaults, push [F-1]–[F-3] for 1 sec. one or more times to until the desired band appears in the dis- play above the corresponding switch.

•The last-used frequency and mode for the selected band are displayed.

USB

S1	3	5	7 9	20	40	60dB	VFO A		BLANK
PO				5		10			CH
S3			7		144			430
			USB
S1	3	5	7 9	20	40	60dB	VFO A		BLANK
PO				5		10			CH
S3			7		GEN			144

Display shows the default bands for the quick band change function.

Display shows [F-2] has been changed from its default of the 50 MHz band to the general receiver band.

BAND	FREQUENCY		MODE
1.9 MHz	1.91000	MHz	CW
3.5 MHz	3.56000	MHz	LSB
7 MHz	7.06000	MHz	LSB
10 MHz	10.13000 MHz		CW
14 MHz	14.10000	MHz	USB
General*	15.10000	MHz	USB

*General refers to the general coverage receiver (GEN in the display) and the range varies according to version.

BAND	FREQUENCY		MODE
18 MHz	18.15000	MHz	USB
21 MHz	21.30000	MHz	USB
24 MHz	24.95000	MHz	USB
28 MHz	28.60000	MHz	USB
50 MHz	50.10000	MHz	USB
144 MHz	145.00000	MHz	FM
430 MHz	433.00000	MHz	FM

■Mode selection

The following modes are available in the IC- 706MKIIG:

SSB (LSB/USB), CW, CW-å(CW reverse), FM, WFM (receive only), AM, RTTY and åRTTY (RTTY

OPERATING MODE SELECTION

reverse).

To select the desired mode of operation push [MODE] one or more times, then push [MODE] for 2 sec., if necessary. See the diagram at right for the order of selection.

• The selected mode is indicated in the function display.

Note: If a desired mode cannot be selected, it may be hidden using Initial Set mode (p. 50).

USB LSB

CW CWå

RTTY åRTTY

FM WFM AM

Push

MODE momentarily

Push

MODE for 2 sec.

19