Icom iC-706MKTMG manual Functions for CW, Connections for CW, CW operation, Elec KEY, Microphone

4 RECEIVE AND TRANSMIT

■Functions for CW

DConnections for CW

Rear panel

[ELEC KEY]

For no break-in operation:

[ACC] Connect an external switch such as a foot switch; or use the RTTY

13SEND terminal for all bands.

9 10 11 12 (See p. 35.)

5	6	7	8
1	2	3	4	144/430 MHz
				HF/50 MHz

Quick set mode setting

CW

CW

Paddle

CW

CW

Straight key

CW

See p. 34 for connection details:

Paddle operation from front panel MIC connector.

[MICROPHONE]

Q4 CW PADDLE

Microphone

DCW operation

➀Connect a paddle or straight key as above.

➁Select CW (or CWå) mode with [MODE].

➂Set CW break-in operation as semi break-in, full break-in or OFF.

•Push [DISPLAY] one or two times to select M, if necessary.

•Push [MENU] one or more times to select M4.

•Push [(F-2)BRK] one or more times to select the desired

condition:
➧ “F-BK”:	full break-in
➧ “BK”:	semi break-in

➧No indicator: no break-in (ACC socket connection is necessary as above.)

CW

S1 3	BK		VFO A
	5 7 9 20 40	60dB
PO	5	10	CH

M4 1/4 BRK AGC

CW mode and semi break-in operation is selected.

➃Set the CW delay time when semi break-in opera- tion is selected.

➥Push [DISPLAY] for 2 sec. to select quick set

mode; push [MENU] one or more times to select Q3 BK-IN DELAY; then rotate the main dial to set the desired delay time (see p. 48 for details).

CW

Q3 BK-IN DELAY

Delay time of 6.0 dots is selected in quick set mode for semi break-in operation.

33