Icom iC-706MKTMG, HF/VHF/UHF ALL MODE TRANSCEIVER manual Function switches

1 PANEL DESCRIPTION

■Function switches

DM1 FUNCTIONS

M1	SPL	A/B	A=B
MENU	F-1	F-2	F-3
			XFC
SPLIT OPERATION (p. 29)
SPL	Toggles the split function ON and OFF.
	• “ä”appears when the split function is ON.

F-1• The function of [F-3] changes to XFC when the split function is ON.

VFO A/B SELECTION (p. 16)

A/B ➥ Toggles between VFO A and VFO B in VFO mode.

F-2➥ Toggles between transmission VFO and reception VFO during split operation.

➥Toggles between the transmit and receive frequencies (and modes) of memory channels when the split func- tion is turned ON.

VFO EQUALIZATION (p. 16)

A=B Equalizes the frequency and operating mode of the two VFO’s.

F-3• The rear (undisplayed) frequency and operat- ing mode are equalized to the front (displayed) VFO frequency and operating mode.

TRANSMIT FREQUENCY CHECK (p. 29)

Appears when the split function is turned XFC ON—monitors the transmit frequency

F-3when pushed and held.

•While pushed, the transmit frequency can be changed with the main dial.

DM2 FUNCTIONS

M2 MW MÜV V/M

MENU F-1 F-2 F-3

MCL(in memory mode)

MEMORY WRITE (p. 40)

MW Stores the displayed frequency and operat- ing mode into the displayed memory chan-

F-1 nel.

MEMORY TRANSFER (p. 41)

MÜV Transfers the frequency and operating mode in the selected memory channel to a

F-2 VFO.

VFO/MEMORY (p. 39)

V/M modes.Toggles between VFO and memory

F-3

MEMORY CLEAR (p. 39)

MCL Clears the selected memory channel’s contents.

F-2• “}” appears.

DM3 FUNCTIONS

M3 FIL NB MET

MENU F-1 F-2 F-3

NARROW FILTER (p. 23)

Toggles the narrow filter (or wide filter— FIL push for 2 sec.) ON and OFF.

F-1• “ã”appears when the narrow filter is ON; “ç” appears when the wide filter is ON.

•An optional narrow filter and presetting in initial set mode (p. 51) is necessary to use the fol- lowing:

CW/RTTY narrow: FL-100, FL-101 or FL-232

SSB narrow: FL-223

SSB wide: FL-103

NOISE BLANKER (p. 21)

NB	Turns the noise blanker ON and OFF.
	• The noise blanker does not function in FM and
F-2	WFM modes; the “AM Noise blanker” item in
	initial set mode must be set to ON for the noise
	blanker to work in AM mode (p. 53).

METER SELECTION (p. 25)

MET Selects the type of meter displayed (during transmit) in the function display.

F-3 • Power, ALC or SWR metering can be select-

ed.

• Only an S-meter is available for receive.

DM4 FUNCTIONS

DURING SSB/AM OPERATION:

M4	VOX	COM	AGC
MENU	F-1	F-2	F-3
DURING CW OPERATION:
M4	i/4	BRK	AGC
MENU	F-1	F-2	F-3
DURING RTTY OPERATION:
M4	1/4		AGC
MENU	F-1	F-2	F-3
DURING FM OPERATION:
M4	VOX	TSQ	TON
MENU	F-1	F-2	F-3

3