OCPRF100 MP Server System Technical Product Specification
Revision 1.0
|
| A |
|
| B |
|
|
|
| C | |||||||
| Captive Screw |
|
|
|
|
| ||
|
|
|
|
| Air Baffle | |||
|
|
|
|
| Strap |
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Figure
A processor/termination card pair is secured with a
The processor retention mechanism is secured to the mezzanine boards with the same four lock bars that secure the mezzanine boards to the Profusion carrier board. In the event the server is populated with only a single processor mezzanine card, an air baffle (C) must be installed on the vacant side of the processor retention mechanism.
To remove or add a processor, first release the captive screws (A), then swing the retention strap
(B)upward. Remove the terminator card, and install the processor. Replace the retention strap (B), and tighten the captive screw (A).
Due to space restrictions in the system, the Profusion carrier tray assembly must be removed from the chassis to install and service the mezzanine boards. The fan bay assembly must be removed prior to removing the Profusion carrier tray.
10