OCPRF100 MP Server System Technical Product Specification

Revision 1.0

Figure 2-11: Midplane Assembly Installed in System

2.10 I/O Carrier

The I/O carrier is the interface that connects the I/O port of the Profusion chip set to the following:

Ten hot-swappable PCI slots (four of which support 66-MHz transactions).

Legacy connector (video, keyboard, serial, parallel, USB, and Intelligent Chassis Man- agement Bus (ICMB) ports).

Dual LVDS.

Internal IDE buses, floppy disk, disk drives, and SCSI connectors for peripheral support.

The PCI hot-plug (PHP) I/O carrier, legacy connector, LVDS connectors, ICMB board, and enhanced PCI hot-plug board are assembled onto the I/O carrier tray. The PCI hot-plug base shield is assembled and mounted over the PHP I/O board, and secured by six screws. The PHP slot dividers snap onto the PHP base shield.

14