OCPRF100 MP Server System Technical Product Specification

Revision 1.0

System BIOS

Embedded video BIOS and SCSI BIOS

BIOS Setup Utility

Integrator-supplied user binary area

Language file

iFLASH communicates with the existing BIOS to provide security mechanisms which reduce the risk of tampering. It also communicates with BIOS to verify that the new BIOS image is compatible with the existing image. This helps to prevent an incorrect BIOS from being placed into flash memory.

iFLASH operates in three modes: Interactive Mode, Command Line Mode, and Recovery Mode. Interactive Mode and Command Line Mode are used in normal situations. In these modes, the user boots DOS and then executes the iFLASH utility. The keyboard and video monitor are available for issuing commands, locating files, and displaying progress. If iFLASH is interrupted by a power failure or by user intervention, the flash ROM may contain an incomplete BIOS. Recovery Mode provides a method to install the BIOS when the flash ROM has been corrupted.

For best results, iFLASH should run under DOS with no extended memory managers loaded. The flash utility does not support DPMI environments such as Windows*, Windows 95, or Windows NT*. Because the utility is written for DOS, it does not run under any other operating sys- tem.

For more information on iFLASH, see the OPRF100 MP Board Set Technical Product Specification .

87