Flash BIOS Protect (JP8)

You can set the JP8 to protect BIOS write-enable. The configura- tion is as follows:

Flash BIOS Protect (JP8)

Write protect (default) Write-enable

Flash BIOS Write-enable Voltage (JP13)

This jumper sets the voltage supplied to the Flash BIOS Write- enable. The figure below shows the proper jumper settings for both 5V and 12V voltage.

Flash BIOS Write-enable Voltage (JP13)

5 V (default)

12 V

 

 

 

 

 

 

 

 

 

 

 

 

Chapter 2 Installation 33

Page 40 Page 42
Page 41
Image 41
Intel SBC-455 manual Flash Bios Protect JP8, Flash Bios Write-enable Voltage JP13
Page 40 Page 42
Top Page Image Contents