Intel SBC-455 manual Diskette copies of the OS/2 drivers must have a

4.When running WIN-OS/2, DO NOT use <ALT>+<HOME> to switch a DOS or OS/2 Full Screen session to Windows. If this happens, do a system shutdown and reboot.

Driver diskette copy

NOTE:	Diskette copies of the OS/2 drivers must have a
	VOLUME LABEL that reads “DISP 1” in order to be
	an installable diskette.

To copy the OS/2 Display Driver Diskette, follow these instruc- tions:

1.Copy all files on the OS/2 Display Driver Diskette as you normally would onto another diskette.

2.Place the diskette copy in drive A. At the C:\ prompt, type LABEL A: DISP 1 to properly label your diskette. Then store your diskette copy in a safe place.

For proper installation of OS/2 drivers, all diskette copies must be properly labeled “DISP 1”.

Chapter 5 Flat Panel/ CRT Controller 71