Installing and Removing a Slimline USB Floppy/ CD/DVD Combo Kit

Installing a Slimline USB Floppy/CD/DVD Slimline Kit

Refer to the Slimline USB Floppy/CD-ROM/DVD-ROM Drive Kit Install Guide that shipped with your slimline combo kit for installation instructions.

Removing a Slimline USB Floppy/CD/DVD Combo

1.Observe the safety and ESD precautions at the beginning of this book.

2.Power down the server and unplug all peripheral devices and the AC power cable.

3.Remove the chassis cover. For instructions, see “Removing the Chassis Cover” on page 16.

4.Remove the front bezel if it is installed. For instructions, see “Removing and Installing the Front Bezel” on page 18.

5.Disconnect the power and data cables to the slimline combo drive assembly.

6.Remove the combo drive/slide assembly from the chassis by pressing in on the slide release latches (see letter “A” in the following figure). Remove the slides from the slimline combo drive tray by pulling the slides away from the tray (see letter “B”). A gentle pull should release the slide from the side dimple on the drive tray.

 

A

A

B

 

B

AF000575

Figure 17. Removing Slide/Drive Assembly from Upper Device Bay

26

Intel® Server Chassis SC5400 User’s Guide

Page 44
Image 44
Intel SC5400 manual Installing a Slimline USB Floppy/CD/DVD Slimline Kit, Removing a Slimline USB Floppy/CD/DVD Combo