Installing Additional Hot Swap Power Supply Module

Caution: This step only applies to a chassis with redundant power supply capability. Do not perform this step if your chassis has a fixed power supply.

1.Remove screws (see letter “A” in the following figure). Remove the power supply filler panel (see letter “B”).

A

A

B

AF000602

Figure 53. Removing Power Supply Filler Panel

2.Insert the power supply module until it clicks into place. Secure with screw (see letter “A” in the following figure) if shipping chassis to another location.

A

AF000603

Figure 54. Installing Additional Hot Swap Power Supply Module

Intel® Server Chassis SC5400 User’s Guide

51

Page 69
Image 69
Intel SC5400 manual Installing Additional Hot Swap Power Supply Module, Removing Power Supply Filler Panel