Intel ZT 8101 10/100 To configure advanced traffic control, To configure static IP routes

Using the Web Console

3. Configure these following fields for each port group.

Field	Description
Upper Threshold (Kpps)	Specifies, in thousands, the number of broadcast or multicast packets per
	second a port can receive before triggering a storm control response.
Broadcast Storm Mode	Enables or disables storm control for broadcast packets.
Multicast Storm Mode	Enables or disables storm control for multicast packets.

4. Click Apply.

To configure advanced traffic control

Advance traffic control sets the threshold for the amount of traffic a port can handle before triggering flow control. You must enable flow control on the ports before you can set a flow control threshold. (To enable flow control, see Port Configurations.)

1.In the left panel, click Forwarding.

2.In the top panel under MAC Forwarding, click Advance Traffic Control.

3.Select the port you want to configure and click Edit.

4.In the Flow Control Threshold field, enter a value from 2—57344.

5.If you want this setting to apply to more than the selected port, select a group of ports in the Configure Port from field.

6.Click Apply.

The table displays this information about the ports:

Field	Description
Port	The port number.
Flow Control Threshold	The current value of the flow control threshold.
Drop Packet	A status field that indicates whether the port is currently dropping packets.
Flow Control Status	A status field that indicates whether the port is currently implementing flow
	control.
Port Connection	A status filed that indicates the port’s speed, duplex mode, and flow control
	mode.

To configure static IP routes

1.In the left panel, click Forwarding.

2.In the top panel under IP Forwarding, click Static/Default Routes.

3.Click New and configure these fields.

Field	Description
IP Address	Specifies the IP address to be statically entered into the IP forwarding table.

116 Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch User’s Manual