Intel ZT 8101 10/100 user manual To configure a static router port, Using the Web Console

Using the Web Console

•All IGMP report packets will be forwarded to the router port.

•IGMP queries (from the router port) will be flooded to all ports.

•All UDP multicast packets will be forwarded to the router port. Because routers do not send IGMP reports or implement IGMP snooping, a multi-port router connected to the router port of the Layer 3 switch would not be able to receive UDP data streams from its ports unless the UDP multicast packets were all forwarded to the router port.

A router port will be dynamically configured when IGMP query packets, RIPv2 multicast, DVMRP multicast, PIM-DM multicast packets are detected flowing into a port.

To configure a static router port

1.In the left panel, click Layer 3 IP Networking.

2.In the top panel, click Static Router Port Settings.

3.Click New and configure these fields.

Field	Description
VLAN Name	Specifies the name of the VLAN that you want to configure a static router
	port for.
Port Members	Specifies the ports that you want to set up as static router ports. To select a
	port, click the port.

4.Click Apply.

5.To delete an entry from the table, select the entry and click Delete.

Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch User’s Manual 131