Using the Web Console
1.In the left panel, click Priority Settings.
2.In the top panel, click Priority Based on Port.
3.Click New and configure these fields.
Field | Description | |
|
| |
Port | Specifies which port to configure | |
|
| |
Default Priority | Specifies the priority for this port. The levels are 0 | |
priority. | ||
| ||
|
|
4.Click Apply.
5.To change an entry, repeat steps
User Priority Regeneration
You can enable User Priority Regeneration to set the 802.1p priority bit to a user defined level for all egress frames.
1.In the left panel, click Priority Settings.
2.In the top panel, click User Priority Regeneration.
3.Configure these fields.
Field | Description | |
|
| |
Priority 0 | Specifies the regenerated priority for all egress frames which currently have a | |
level of 0. The levels are 0 | ||
| ||
|
| |
Priority 1 | Specifies the regenerated priority for all egress frames which currently have a | |
level of 1. The levels are 0 | ||
| ||
|
| |
Priority 2 | Specifies the regenerated priority for all egress frames which currently have a | |
level of 2. The levels are 0 | ||
| ||
|
| |
Priority 3 | Specifies the regenerated priority for all egress frames which currently have a | |
level of 3. The levels are 0 | ||
| ||
|
| |
Priority 4 | Specifies the regenerated priority for all egress frames which currently have a | |
level of 4. The levels are 0 | ||
| ||
|
| |
Priority 5 | Specifies the regenerated priority for all egress frames which currently have a | |
level of 5. The levels are 0 | ||
| ||
|
| |
Priority 6 | Specifies the regenerated priority for all egress frames which currently have a | |
level of 6. The levels are 0 | ||
| ||
|
| |
Priority 7 | Specifies the regenerated priority for all egress frames which currently have a | |
level of 7. The levels are 0 | ||
| ||
|
|
4.Click Apply.
5.To change an entry, repeat steps
120 | Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch User’s Manual |
