Using the Telnet Console
4.Highlight APPLY and press Enter.
5.To enter the change into
To configure the member ports of an 802.1Q VLAN
1.From the Main Menu, select VLAN Configurations IEEE 802.1Q Port Settings and press Enter.
2.Highlight the Configure Port field and enter the range of port numbers you want to configure. To configure a single port, enter that port number in both the To and From field.
3.Configure these fields.
Field | Description | |
|
| |
| Enables or disables ingress filter checking. Ingress filtering allows the port | |
Ingress Checking | to compare the VID tag of an incoming packet with the PVID number | |
assigned to the port. If the two are different, the port filters (drops) the | ||
| ||
| packet. Use the spacebar to toggle between On and Off. | |
|
| |
| Enables or disables GVRP (GARP VLAN Registration Protocol). This allows | |
GVRP | the switch to share VLAN information with other switches so that a VLAN | |
| can span multiple switches. | |
|
|
4. Highlight APPLY and press Enter.
Link Aggregation
Link aggregation allows several ports to be grouped together so that they can act as a single port.
This is done to either increase the bandwidth of a network connection or to increase fault tolerance.
Link Aggregation is most commonly used to link a
You can configure up to six aggregation groups, each using from two to eight ports between any two ZT 8101 switches or other devices that support 802.1ad Link Aggregation.
To configure a link aggregation group
1.From the Main Menu, select Link Aggregation and press Enter.
2.Configure these fields.
Field | Description | |
|
| |
Group ID | Specifies one of the six possible link aggregation groups configurable on the | |
switch. | ||
| ||
|
|
80 | Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch User’s Manual |