Intel ZT 8101 10/100 Restart, Factory Reset, To reset the switch to factory default values

Using the Web Console

Restart

1.To restart the switch, in the left panel click Reboot.

2.Click Yes to save the current switch configuration to non-volatile RAM (flash RAM), or No if you want to restart the switch using the last-saved (previous) configuration.

3.Click Restart.

Factory Reset

The Factory Reset option is used to restart the switch using only the configuration that was supplied by the factory. A factory reset returns all configuration options to their default values and restores the switch's configuration to the factory settings.

All user-entered configuration information is lost.

To reset the switch to factory default values

1.In the left panel, click Factory Reset.

2.Click Yes if you want the switch to retain its current IP address, or No to reset the switch's IP address to the factory default of 10.90.90.90.

3.Click Reboot.

Basic Settings

This section describes how to perform common monitoring and configuration tasks on the switch.

Condition	Task
Using SNMP for network management	Configure the options in the Network Management
	Setup screens.
Installing more than one switch	Use the Switch Utilities to save configurations for use
	on multiple switches.
Testing communication with other devices	Use the Ping Test utility from the Switch Utilities
	menu.
Need to set the port settings for the serial port to	Configure the options with the Serial Port Settings
values other than the default values	screen.

Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch User’s Manual 95