Using the Telnet Console
2.Select Configure Port GMRP Settings, and press Enter.
3.Select and configure these fields:
Field | Description |
|
|
Configure Port | Specifies which port(s) to configure |
|
|
GMRP State | Specifies the state (off or on) of GMRP for this port. |
|
|
4.Highlight APPLY and press Enter.
5.To change an entry, repeat steps
To configure VLANs supporting GMRP
1.From the Main Menu, select GMRP and press Enter.
2.Select Configure VLANs Supporting GMRP, and press Enter.
3.Select and configure these fields:
Field | Description |
|
|
VID | Specifies which VLAN ID to configure |
|
|
Support GMRP | Specifies the state (off or on) of GMRP for this VLAN |
|
|
4.Highlight APPLY and press Enter.
5.To change an entry, repeat steps
VLAN Configuration
The switch allows the assignment of an IP interface to each VLAN. A VLAN must be configured before setting up its IP interface. You can create either a
To configure GVRP globally
The global GVRP flag determines whether GVRP (GARP VLAN Registration Protocol) is enabled on the switch so that the switch can share VLAN information with other switches, and VLANs can span multiple switches. When this flag is disabled, VLANs are confined to the physical connections of the switch. By default, this flag is disabled.
1.From the Main Menu, select VLAN Configurations and press Enter.
2.Use the spacebar to toggle the Switch GVRP field to Enabled or Disabled.
3.Highlight APPLY and press Enter.
To create or modify a port-based VLAN
1.From the Main Menu, select VLAN Configurations Configure VLAN Settings and press Enter.
78 | Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch User’s Manual |