Intel ZT 8101 10/100 Main Menu, Using the Telnet Console, •Basic Setup, •Advanced Setup

Using the Telnet Console

Figure 3. Main Menu

•Basic Setup

—Switch Information—Display information about the switch’s hardware and firmware.

—Basic Switch Setup—Configure the switch’s IP address.

—Serial Port Settings—Configure the switch’s serial port that is used for terminal sessions.

—Port Configurations—Enable/disable individual ports and set their speed and duplex state.

—User Accounts—Set up user accounts, change their passwords, and modify their access rights.

—Network Management—Set up SNMP traps and community strings.

—Switch Utilities—View the history log, ping other devices, and manage firmware and configuration files.

—Network Monitoring—View various statistics by port or protocol and various routing tables.

•Advanced Setup

—Spanning Tree—Enable/disable the Spanning Tree Protocol (STP) for the switch and on individual ports.

—Forwarding—Reduce traffic congestion on the network by configuring MAC address aging, unicast packet forwarding, storm control, and static IP routes.

—IP Address Filtering—Configure filters to handle packets from specified IP addresses.

Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch User’s Manual 49