Regulatory Information, Safety Precautions

Agency Approvals

Regulatory Information

FCC—Federal Communications Commission (USA)

This product has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

Note: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: If you make any modification to the equipment not expressly approved by Intel, you could void your authority to operate the equipment.

Industry Canada (Canada)

Cet appareil numérique respecte les limites bruits radioélectriques applicables aux appareils numériques de Classe A prescrites dans la norme sur le matériel brouilleur: "Appareils Numériques", NMB-003 édictée par le Ministre Canadien des Communications.

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the interference-causing equipment standard entitled: "Digital Apparatus," ICES-003 of the Canadian Department of Communications.

Product Safety Information

Safety Precautions

Review the following precautions to avoid injury and prevent damage to this product, or products to which it is connected. To avoid potential hazards, use the product only as specified.

Read all safety information provided in the component product user manuals and understand the precautions associated with safety symbols, written warnings, and cautions before accessing parts or locations within the unit.

Caution: To Avoid Electric Overload. To avoid electrical hazards (heat shock and/or fire hazard), do not make connections to terminals outside the range specified for that terminal.

See the product user manual for correct connections.

Caution: To Avoid the Risk of Electric Shock. When supplying power to the system, always make connections to a grounded main. Always use a power cable with a grounded plug (third grounding pin). Do not operate in wet, damp, or condensing conditions.

134	Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch User’s Manual

ZT 8101 10/100 specifications

The Intel ZT 8101 10/100 is a highly regarded network interface controller designed for efficient data communication in both home and enterprise environments. This versatile chip offers robust support for various networking technologies, making it suitable for a wide range of applications.

One of the most significant features of the Intel ZT 8101 is its capability to operate at both 10 Mbps and 100 Mbps, allowing for seamless integration into existing networks. This dual-speed functionality ensures that users can enjoy the benefits of faster data transfer rates while still maintaining compatibility with legacy hardware. The device automatically detects the network speed, facilitating a plug-and-play experience that minimizes user intervention.

The Intel ZT 8101 utilizes advanced features such as full-duplex support, which enables simultaneous data transmission and reception. This capability significantly enhances network efficiency and maximizes throughput, making it ideal for environments with high data traffic. Moreover, the chip employs sophisticated packet processing algorithms to prioritize data, reducing latency and ensuring smoother communication.

In terms of power efficiency, the Intel ZT 8101 is designed to consume minimal power, making it a suitable choice for energy-conscious applications. Its low power consumption allows for more efficient operations, contributing to overall system stability and longevity. Additionally, it incorporates power management features that can dynamically adjust the power usage based on network demand.

Another notable characteristic is the integration of hardware-based flow control, which helps prevent data packet loss during high-utilization periods. This capability is essential for maintaining the integrity of data transmission in busy network environments. The chip’s robust error detection and correction mechanisms further enhance data reliability, minimizing the chances of transmission errors.

The Intel ZT 8101 supports various network standards, including IEEE 802.3 and IEEE 802.3u, ensuring compatibility with a wide range of Ethernet devices. Its flexibility makes it an excellent choice for network upgrades, expansions, or new installations, allowing users to tailor their network infrastructure according to specific needs.

In summary, the Intel ZT 8101 10/100 network interface controller stands out for its dual-speed support, energy efficiency, and advanced networking features. Whether for home users looking to improve their network performance or businesses seeking reliable data communication solutions, the ZT 8101 represents a compelling choice that combines technology, reliability, and efficiency. As network demands continue to evolve, this Intel chip remains a fundamental component in many networking scenarios.

Intel ZT 8101 10/100 Regulatory Information, Product Safety Information, Industry Canada Canada

Models: ZT 8101 10/100