Jensen VM8514 operating instructions IPod Operation, Accessing iPod Mode

VM8514

iPod OPERATION

Accessing iPod Mode

This unit is Made for iPod. You can control your iPod via the head units front panel buttons and access Playlist, Artist, Album, Songs, etc. Models supported but not limited to:

•iPod Classic

•iPod Touch / 2G / 3G

•iPod Nano / 2G / 3G / 4G / 5G

•iPhone / 2G / 3GS

NOTE: Be sure your iPod has the latest Apple firmware installed to avoid connectivity issues.

The unit will automatically switch to iPod mode when an iPod is plugged into either USB connector. To return to the iPod screen from any other source, press the SRC button on the front panel (6) or remote control (14) and select SOURCE » USB1 (or USB2). After switching to iPod source, the iPod menu appears on the screen.

NOTE: For basic iPod connectivity, you can use the white 3D-pin to USB iPod cable that came with your Apple device. For iPod video or photo playback, you must purchase the jLink-USB cable.

The following remote control buttons are used to access the iPod menus:

Menu	Remote Control
Music	AUDIO
Videos	ANGLE
Photos	SUBTITLE
	29