Operating the Main Menu (Cont.)
Configuration of the Main Menu (Computer-related input)
Operating the Main Menu (Cont.)
Operating the Main Menu (Basic Operation of the Main Menu)
Main menu
■Remote control unit
For projector’s menus, the setting menu and the main menu are available.
PIXEL CLOCK
POSITION
PICTURE
TRACKING | : The lateral size and display area of video image are adjusted. | |
PHASE | : Flickering or dim video image is adjusted. | |
V. POS. | : The vertical position of the video image being projected is adjusted. | |
H. POS. | : The horizontal position of the video image being projected is adjusted. | |
BRIGHTNESS | : The brightness of the video image being projected is adjusted. | |
CONTRAST | : The contrast of the video image being projected is adjusted. | |
: The gain in red signal of the video image being projected is adjusted. | ||
: The gain in green signal of the video image being projected is adjusted. | ||
: The gain in blue signal of the video image being projected is adjusted. | ||
TEXT MODE | : Adjust easiness for reading text during RESIZE. | |
| NORMAL: Normal | |
| TEXT 1: | Display the outline of small letters already. |
| TEXT 2: | Makes the outline of large letters sharp. |
ALL RESET | : All the items adjusted are reset. | |
QUICK |
|
ALIGN. | OPERATE |
| AV HIDE |
PRESET | PAGE BACK |
LENS LOCK | PAGE BACK button |
N | |
| M |
| EN |
| U/ |
UNLOCK | E |
T | |
| E |
| R |
| MENU/ENTER button |
AV RGB/COMPUTER
U T +
SHIFT ZOOM FOCUS
D W –
LENS
Here, we explain about the operation of the main menu.
For the setting menu, refer to “Making Basic Settings” on page 30.
1 Press the MENU/ENTER button.
• The main menu is displayed on the screen.
2 Press MENU/ENTER toward the 5 or ∞ mark to select an item.
•The selected item (displayed text) is shown in magenta color on the screen.
3 Set (adjust) the item.
■When you have selected DECODER or LANGUAGE,
• Press MENU/ENTER toward the 2 or 3 mark to set.
OPTIONS
MENU AUTO OFF | : | Sets whether to turn off menu display automatically (YES) or not (NO). |
LINE DISPLAY | : | Sets whether to make the line display effective (ON) or not (OFF) for about 5 seconds after input |
| switching. |
RIGHT LEFT REV. : Image is reversed | |
TOP BOTTOM INV. : Image is inverted | |
CLAMP | : Sets the clamp pulse’s position at the back porch (BP) or on the sink tip (ST). Normally, the clamp |
| pulse is used at BP. If, with some PCs or workstations, the screen becomes unstable such as |
| being too dark or too bright, try to switch to ST. |
*To finish the main menu, press the PAGE BACK button.
■When you have selected an item on the submenu,
•Press MENU/ENTER to display the submenu. Then, set (adjust) the item by pressing MENU/ENTER toward the 2/3 or 5/∞ mark.
*To return to the main menu, press PAGE BACK again. To finish the main menu, press PAGE BACK again. (To finish the main menu from the submenu, press PAGE BACK twice.)
No.51666
SOURCE
RESIZE | : When the number of pixels (resolution) sought by the video image input is smaller than that |
| (resolution) of |
| device and projected. (Resizing indication) |
BACK COLOR | : Specifies the background color when there is no image signal. Background color can be selected |
| from BLUE, CYAN, BLACK, GREEN, MAGENTA, RED, and YELLOW. |
COLOR TEMP. | : Adjusts the color temperature of the video image being projected. Make adjustment when the |
| video image becomes reddish or bluish. |
| Color temperature can be set to LOW, MIDDLE, or HIGH. |
ASPECT CHANGE : Selects the
| When projecting |
SLEEP TIME | : Sets the length of sleep time. A set sleep time after input signal is depleted, the projector goes into |
| a |
| and 0 minute. (If you select 0 minutes, the sleep time will be cleared.) |
LAMP TIME | : Indicates accumulated used hours of the |
:Normally used in AUTO. If use in AUTO is unstable such as color not appearing, the screen being disturbed or the screen being intermitted, set to the dedicated source (forced mode) in accordance with the input signal.
USER allows you to set a source which is uniquely adjusted by the user.
■Main menu
Submenu items
Input line |
| Source | Channel | ||||||||
| |||||||||||
|
|
|
|
| |||||||
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| C H : | 1 |
| ||
Y P B P R |
|
|
|
| H D T V ( 1 0 8 0 i ) |
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
P I X E L C L O C K
P O S I T I O N
P I C T U R E
O P T I O N S
S O U R C E
C H A N N E L
U S E R S O U R C E S E T U P
D I S P L A Y S I Z E
D E C O D E R | N T S C ( 4 8 0 i ) |
■About main menu display:
Line display: The selected input-mode designation is
displayed. For
Source display: The type of signal being input is displayed. With this projector, unique designations are previously given to specific horizontal and vertical frequencies. This allows the source selected under SOURCE (submenu item) to be indicated. The source setting can be selected from AUTO mode, dedicated (forced) modes and USER mode. When AUTO is selected, the horizontal and vertical frequencies of a signal being input are detected and the matched designation is displayed in ( ).
Display example: “AUTO (NTSC(480i))”
CHANNEL
USER SOURCE SET UP
DISPLAY SIZE
DECODER 
LANGUAGE
:Sets a line and multiple sources for each channel.
:Sets up an area for the source being input, and registers the user name.
:Adjusts H PIXEL, V PIXEL, H CENTER and V CENTER of video image.
:Does not work with
:Text on the screen can be changed to a language other than English. Languages that can be displayed are the
following six : 
(Japanese), ENGLISH, DEUTSCH (German), ESPAÑOL (Spanish), ITALIANO (Italian), and FRANÇAIS (French). However, some text such as “QUICK ALIGNMENT”, etc. are shown only in English.
L A N G U A G E | E N G L I S H |
Decoder (color system) Language
Therefore, be careful as the source display does not always correspond to the indication or type of the input signal.
For the unique designations for the specific horizontal and vertical frequencies, see page 19.
Channel display: The channel selected by the user is displayed. The line, sources and switcher No. selected by the user have been registered to the channel. Once registered, the line, sources and switcher No. of the projector will change to the ones the user has registered only by switching between channels. The settings should be made on the “Channel setup/selection menu”. For details, see page 47.
Submenu item display: | See pages 36 to 58. |
Decoder (Color system) display: See page 34. | |
Language display: | See page 35. |
DLA- DLA-
32
33
M4000LU M4000LE
