JVC DLA-M4000LU Cleaning and Replacing the Filter, Remove the filter cover screws

Operating the Main Menu (Cont.)

Setting Up (or Changing) the Display Size (Cont.)

Filter Maintenance and Light-Source Lamp Replacement

Cleaning and Replacing the Filter

DLA-M4000LU DLA-M4000LE

■Remote control unit

QUICK
ALIGN.	OPERATE
	AV HIDE
PRESET	PAGE BACK
	PAGE BACK button

Adjustment item	Contents of adjustment
H PIXEL	Adjusts the number of horizontal effective dots.
	Adjustment value (640Ô1360)
V PIXEL	Adjusts the number of vertical effective dots.

The filters should be cleaned periodically. If they are heavily stained, do not become clean if cleaned, or are damaged, replace them with new filters (Parts number: LC30505); otherwise, dirt and dust may get inside, possibly causing an adverse effect on the screen and preventing you from enjoying clear pictures.

■The projector has two filters installed, one on the right side and the other on the back.

LENS LOCK	M
	EN
	U/
	E
	N
UNLOCK	T
	E
	R
	MENU/ENTER button
AV	RGB/COMPUTER

	Adjustment value (350Ô1024)
H CENTER	Adjusts the horizontal display position.
	Adjustment value (0Ô639)
V CENTER	Adjusts the horizontal display position.
	Adjustment value (1Ô511)

1 Bring the projector into stand-by state, and turn off the MAIN POWER switch.

Put the projector into stand-by, and make sure the STAND BY indicator is lit, then tun off the MAIN POWER switch. After that, disconnect the power cord from the wall outlet and the projector. For detailed procedures, refer to

Note

•If the filter is clogged with dirt, etc., the projector goes into an emergency mode (the EMERGENCY indicator blinks).

So, clean the filter periodically. For the emergency mode, refer to pages 8 and 24.

There are two filters used.

U	T	+
SHIFT	ZOOM	FOCUS	■ To return to the main menu, press PAGE BACK. To finish
D	W	–
	LENS		the main menu, press PAGE BACK again.

No.
51666	■Main menu
			A U T O
	C O M P 1		S X G A 1
		P I X E L C L O C K
		P O S I T I O N
		P I C T U R E
		O P T I O N S
		S O U R C E
		C H A N N E L
		U S E R S O U R C E S E T U P
		D I S P L A Y S I Z E
		D E C O D E R	N T S C ( 4 8 0 i )
		L A N G U A G E	E N G L I S H

Submenu item [DISPLAY SIZE]

Note

•The selected item is shown in magenta color. Items shown in gray color cannot be operated or set in the current mode.

“Turning off the power” (page 25).

2 Remove the filter cover screws.

Using a Phillips screwdriver, remove the six screws fixing each filter.

Two filters are used, one on the right side and the other on the back of the projector.

3 Remove the filters.

To remove the filter, pinch the center portion of the filter with your fingers and pull it toward you.

(The filter is held by four tabs.)

(To be continued on the next page)

58 59