JVC DR-M150SEK manual When using your unit as the source player

Filename [M150SEK_09Editing.fm]
M150SEK_00.book Page 56 Wednesday, June 15, 2005 4:04 PM	Masterpage:Left+

56 EN EDITING

		Edit To Or From Another Recorder	1 Connect another recorder’s 21-pin SCART connector to the
			unit’s 21-pin SCART connector as illustrated.
			A When using your unit as the source player:
You can use your unit as the source player or as the recording
			^ connect its [L-1 IN/OUT] connector to the recording deck.
deck.			B When using your unit as the recording deck:
NOTE:			^ connect its [L-2 IN] connector to the source player.
When using another recorder as the recording deck, refer to its			● If another recorder is compatible with the Y/C signal:
instruction manual.			^ when using your unit as the source player, set AL-1
			OUTPUTB to ASCART S-VIDEOB. (A pg. 57)
	A When using your unit as the source player		^ when using your unit as the recording deck, set AL-2
			SELECTB to AS-VIDEO/RGBB. (A pg. 58)

TV receiver Player Your unit

21-pin SCART cable (supplied)

21-pin SCART cable (not supplied)

Another recorder

Recorder

BWhen using your unit as the recording deck

TV receiver Recorder Your unit

21-pin SCART cable (supplied)

21-pin SCART cable (not supplied)

2When using this unit as the recording deck, press PR +/– to select AL-2B.

●Set AL-2 SELECTB to AVIDEO/RGBB or AS-VIDEO/RGBB. (A pg. 58)

3When using this unit as the recording deck, press REC MODE repeatedly to set the recording mode.

4Engage the Play mode of the source player.

5Engage the Record mode of the recording deck.

6Stop recording on the recording deck, then stop playback on the source player.

NOTES:

●All necessary cables can be obtained from your dealer.

●For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.

●When you use this unit as the source player for editing, be sure to set ASUPERIMPOSEB to AOFFB before starting. (A pg. 61)

●If you are using another recorder with S-Video and Audio output connectors, connect its S-Video and Audio output connectors to this unit’s [S-VIDEO]and [AUDIO] input connectors on the front panel. Then, set the unit’s input mode to AF-1Bin step 2, and set AF-1 INPUTB to AS-VIDEOB. (A pg. 58)

Another recorder

Player