JVC DR-M150SEK manual Tuner Set, Auto Channel Set, Manual Channel Set

Signal Level

Signal Quality

Channel Number

Manual Search

Filename [M150SEK_10Subsidiary.fm]
M150SEK_00.book Page 64 Wednesday, June 15, 2005 4:04 PM	Masterpage:Left+

64 EN SUBSIDIARY SETTINGS

	Tuner Set	5 Upon completing
			CHANNEL SET				DTV SETTING		CLOCK SET
		AAUTO SEARCHB, the
			DVD SET UP		FUNCTION SET UP INITIAL SET UP
		screen display returns
Your unit needs to memorise all necessary stations in channel
		to the Main Menu		AUTO SEARCH
positions in order to record TV programmes. Auto Channel Set		screen and AAUTO		T-V LINK			AUTO SEARCH
automatically assigns all receivable stations in your area to call		SEARCH SCAN				SCAN COMPLETED
them up by using the PR +/– buttons without going through any		COMPLETEDB						OK
vacant channels.		appears on the TV
● Turn on the unit.		screen. Press ENTER.	SET UP		OK			SELECT WITH [CURSORS]
		6 Press SET UP to	RETURN		SELECT			THEN PRESS [ENTER]
● Turn on the TV and select an input mode such as EXT1.
● Slide the TV/DVD switch to DVD.		complete AAUTO
		SEARCHB.

TV DVD

Selection Keys

(FGDE)

ENTER

SET UP

IMPORTANT:

●In certain reception conditions, the station channel numbers may not be stored correctly. When the channel numbers are not set properly, the programme that you do not intended to record will be timer recorded. When programming timer recording, be sure to check that the desired channel is selected correctly. ACheck, Cancel And Change ProgrammesB (A pg. 41)

●Your unit memorises all receivable stations even if reception of some of them is poor. You can delete those stations with an unacceptable picture from the PR list. (A pg. 65, ADelete A ChannelB)

●If channel set is performed, all the favourite channels that have been set will be removed. The AFAVOURITE MODEB

(A pg. 20) setting will automatically be set to AOFFB.

NOTES:

●Fine tuning is performed automatically during Auto Channel Set.

●If you perform Auto Channel Set when the aerial cable is not connected properly, ANO SIGNALB appears on the TV screen in step 4. In such a case, make sure of the aerial connection, select ARETRYB, then press ENTER. Auto Channel Set will start again.

IMPORTANT:

Perform the following steps only if ^

^Auto Channel Set has not been set correctly by Auto Set Up. (A pg. 17)

^you have moved to a different area or if a new station starts broadcasting in your area.

Auto Channel Set

1Press SET UP in DTV mode to access the Main Menu screen.

2Press selection keys to select AINITIAL SET UPB, then press

ENTER.

3Press selection keys to select ACHANNEL SETB, then press

ENTER.

4Select AAUTO SEARCHB, then press ENTER.

● AAUTO SEARCHB
	Auto Search
starts.	Programs
	radio
	BBC ONE Scot
	BBC TWO Scot
	BBC THREE
	BBC NEWS 24
	BBCi
	CBBC Channnel
	BBC R Scotland
	BBC R n Gaidheal

UHFCH:65

0% 100%

CANCEL

Press to Cancel search ...

Manual Channel Set

Perform manual channel set to add new channels or when checking the signal condition of the channels.

1Press SET UP in DTV mode to access the Main Menu screen.

2Press selection keys to select AINITIAL SET UPB, then press

ENTER.

3Press selection keys to select ACHANNEL SETB, then press

ENTER.

4Press selection keys to select AMANUAL SEARCHB, then press ENTER.

5Press the number

keys to enter the

channel number, then26 press ENTER.

●AMANUAL SEARCHB starts.

●Confirm the signal

condition with the signal level bar. If the

picture is displayed, it Select 0 .. 9 Value entry ENTER Search

does not matter even if the level bar indicates below mid-level.

●Once the channel is received, the screen displays the programme list for a few seconds before returning to the AMANUAL SEARCHB screen.

●If the channel is not received, the screen display returns to the AMANUAL SEARCHB screen without displaying the programme list.

●Repeat step 5 to add or check other channels.

6Upon completing AMANUAL SEARCHB, press SET UP on the remote control.