JVC DR-M150SEK manual Select Setting, Input Setting, Select VIDEO/RGB / S-VIDEO/RGB /SAT VIDEO/RGB

Filename [M150SEK_09Editing.fm]
M150SEK_00.book Page 58 Wednesday, June 15, 2005 4:04 PM	Masterpage:Left+

58 EN EDITING

Selection Keys

(FGDE)

ENTER

SET UP

NOTES:

●When RGB signals are output from the connected appliance such as a satellite receiver, the unit will record in RGB signals.

●If you have a satellite receiver connected to the [L-2 IN] connector, be sure to set AL-2 SELECTB back to appropriate mode after editing.

●When you want to play back and record RGB picture, connect the satellite receiver’s RGB compatible output connector to the unit’s input connector.

●If you are not connecting a satellite receiver to the [L-2 IN] connector, leave AL-2 SELECTB set to AVIDEO/RGBB.

●When AL-2 SELECTB is set to ASAT VIDEO/RGBB and ASAT S-VIDEO/RGBB, ASATB appears on the TV screen or front display panel instead of AL-2B.

●If AL-1 OUTPUTB is set to ASCART S-VIDEOB, it is not possible to set AL-2 SELECTB to ASAT VIDEO/RGBB.

●If AL-1 OUTPUTB is set to ASCART RGBB, it is not possible to set AL-2 SELECTB to ASAT S-VIDEO/RGBB.

●If AL-1 OUTPUTB is set to ACOMPONENTB and AL-2 SELECTB to ASAT VIDEO/RGBB or ASAT S-VIDEO/RGBB, be sure to connect the [L-1 IN/OUT] connector with a TV.

●If AL-2 SELECTB is set to ASAT S-VIDEO/RGBB, be sure to set AL-1 OUTPUTB to ASCART S-VIDEOB.

L-2 Select Setting

Set AL-2 SELECTB to the appropriate mode depending on the type of appliance connected to the unit’s [L-2 IN] connector.

1Perform steps 1 and 2 of AL-1 Output And L-1 Input SettingB (A pg. 57).

2Press selection keys to select AL-2 SELECTB, then press

ENTER.

3Press selection keys

to select the	DVD SET UP		FUNCTION SET UP INITIAL SET UP
appropriate setting,
	VIDEO IN/OUT		RECORDING SET	DISPLAY SET			OTHERS
then press ENTER.
		MONITOR TYPE			16:9AUTO
4 Press SET UP to
		F-1 INPUT				VIDEO
complete the setting.
		L-1 INPUT				VIDEO
		L-1 OUTPUT			SCART VIDEO
		L-2 SELECT				VIDEO/RGB
						S-VIDEO
						S-VIDEO/RGB
	SET UP		OK			SAT VIDEO/RGB
				SELECT		WITH [CURSORS]
	EXIT		SELECT	THEN PRESS [ENTER]

* The boldface settings below indicate the settings at your purchase.

8L-2 SELECT ^VIDEO/RGB / S-VIDEO/RGB /SAT VIDEO/RGB /

SAT S-VIDEO/RGB

Select AVIDEO/RGBB or AS-VIDEO/RGBBto use this unit as the recording deck with the player connected to the [L-2 IN] connector, or to use the satellite receiver connected to the [L-2 IN] connector.

VIDEO/RGB:

If a connected appliance’s output is compatible only with regular video signals, set to AVIDEO/RGBB.

S-VIDEO/RGB:

If a connected appliance’s output is compatible with Y/C signals, set to AS-VIDEO/RGBB. You can obtain a high-quality picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

Select ASAT VIDEO/RGBB or ASAT S-VIDEO/RGBBto view a satellite programme with the TV set while the unit is turned off.

SAT VIDEO/RGB:

If a connected satellite receiver’s output is compatible with regular video signals, set to ASAT VIDEO/RGBB.

SAT S-VIDEO/RGB:

If a connected satellite receiver’s output is compatible with Y/C signals, set to ASAT S-VIDEO/RGBB. You can obtain a high- quality S-VIDEO picture. (For connection, be sure to use a 21- pin SCART cable that is compatible with the Y/C signal.)

F-1 Input Setting

Set AF-1 INPUTB to the appropriate mode depending on the connector ([VIDEO] or [S-VIDEO])being used on the front panel.

1Perform steps 1 and 2 of AL-1 Output And L-1 Input SettingB (A pg. 57).

2Press selection keys to select AF-1 INPUTB, then press

ENTER.

3 Press selection keys
	DVD SET UP		FUNCTION SET UP INITIAL SET UP
to select the	VIDEO IN/OUT		RECORDING SET	DISPLAY SET			OTHERS
appropriate setting,
then press ENTER.		MONITOR TYPE			16:9AUTO
4 Press SET UP to
		F-1 INPUT				VIDEO
						VIDEO
		L-1 INPUT				S-VIDEO
complete the setting.
		L-1 OUTPUT			SCART VIDEO
		L-2 SELECT			S-VIDEO/RGB
	SET UP		OK	SELECT WITH [CURSORS]
	EXIT		SELECT	THEN PRESS [ENTER]

* The boldface settings below indicate the settings at your purchase.

8F-1 INPUT ^ VIDEO / S-VIDEOVIDEO:

When connecting an appliance to the [VIDEO] input connector, set to AVIDEOB.

S-VIDEO:

When connecting an appliance to the [S-VIDEO]input connector, set to AS-VIDEOB.