8SAVE AS LIBRARY ^ OFF / ON
When this function is set to AONB, the recording information is
automatically stored in the library. For details, refer to AEdit Library
InformationB (Apg. 51).
8XP MODE REC AUDIO ^ DOLBY DIGITAL / LINEAR PCM
You can select the audio format when you record a title in XP
mode. When this function is set to ALINEAR PCMB, you can obtain
a high-quality audio sound.
To record in Dolby Digital format.
To record in Linear PCM format.
8SUPERIMPOSE ^ OFF / AUTO
When this function is set to AAUTOB, various operational indicators
appear on the TV screen.
To turn off superimposed indications.
To superimpose operational indications for approximately five
seconds just after the corresponding operation.
●Even when ASUPERIMPOSEB is set to AOFFB, you can display
the various operational indicators by pressing ON SCREEN on
the remote control. To clear the operational indicators, press
ON SCREEN again.
●When you use this unit as the source player for editing, be sure to
set ASUPERIMPOSEB to AOFFB before starting. (Apg. 56)
●When you select AAUTOB, during playback, the operation mode
indicators may be disturbed depending on the type of disc being
8GREY BACK ^ OFF / ON
Select this when you want to receive an unstable channel with
When this function is set to AONB, the TV screen becomes all
grey when receiving a channel not in use.
8DIMMER ^ BRIGHT / DIMMED1 / DIMMED2 / OFF
You can change the brightness of the front display panel.
Normally select this. To turn on the display and blue lamp of the
front display panel.
To change the brightness level, and turn off the blue lamp of the
front display panel.
To turn off the display and blue lamp of the front display panel.
8POWER SAVE ^ OFF / ON
When this function is set to AONB, you can reduce the power
consumption while the unit is turned off.
During Power Save mode, the front display panel will be turned off.
8AUTO TIMER ^ OFF / ON
This is the setting for engaging timer recording standby mode.
Press TIMERj to engage timer recording standby mode.
Timer recording standby mode is automatically engaged when
the unit is turned off.
8RESUME ^ OFF / ON / DISC RESUME
When this function is set to AONB or ADISC RESUMEB, you can use
the resume function.
You cannot use the resume function.
The resume function works on the disc loaded on the unit.
The unit retains a memory of the resume points of the last
30 discs played back, even though they have been ejected.
ADISC RESUMEB setting works on DVD VIDEO, VCD, SVCD and
finalised DVD-R/DVD-RW (Video mode) discs. For other types of
discs, the function under AONB setting will be applied even if
ARESUMEB is set to ADISC RESUMEB.
M150SEK_00.book Page 61 Wednesday, June 15, 2005 4:04 PM