JVC DR-MV5S Composite Connection With Cable Box Or DBS Receiver, Get Over It! - Connection - En

GET OVER IT! – CONNECTION – EN 17

Composite Connection (With Cable Box Or DBS Receiver)

		Antenna or Cable
	Coaxial cable
		Flat feeder
	Matching transformer	To [VIDEO/AUDIO INPUT
	(not supplied)	(DVD/VCR)]
RF cable (not supplied)	Audio/video
	cable
To antenna	(not supplied)	AC outlet
input connector		AC power cord

Back of cable box or DBS receiver

To audio/video	Back of unit
output connectors
To antenna output		To [VIDEO/	To [VHF/UHF
connector
		AUDIO OUTPUT	OUT]
		(DVD/VCR)]
RF cable	To [VHF/UHF IN]	Audio/video cable
(not supplied)		(supplied)
			RF cable
		To audio/video input	(supplied)
		connectors

1 Disconnect the antenna from the TV.

2 Connect the antenna to the antenna input connector on the cable box or DBS receiver.

3 Connect the RF cable between the unit’s [VHF/UHF IN] connector to the antenna output connector on the cable box or DBS receiver.

4 Connect the supplied RF cable between the [VHF/ UHF OUT] connector on the rear panel of the unit and the TV’s antenna terminal.

5 Connect the supplied audio/video cable between the [VIDEO/AUDIO OUTPUT (DVD/VCR)] connectors on the unit and the TV’s audio/video input connectors.

NOTE:

If your TV is compatible with S-VIDEO signals, connect the unit’s

[S VIDEO OUTPUT] connector to the TV’s S-VIDEO input connector.

●You can obtain high-quality S-VHS pictures.

●If your TV is not stereo-capable, use the unit’s [AUDIO OUTPUT] connectors to connect to an audio amplifier for Hi-Fi stereo sound reproduction.

To 75 ohm terminal

TV

6 Connect the audio/video cable between the [VIDEO/ AUDIO INPUT (DVD/VCR)] connectors on the unit and the audio/video output connectors on the cable box or DBS receiver.

7 Plug the end of the AC power cord into an AC outlet. This unit performs Plug & Play Set automatically. ( pg. 19)

●The clock and tuner channels will automatically be set when the antenna is connected and when the AC power cord is first connected to an AC outlet. (If “AUTO” and the channel indicator are displayed on the front display panel before the unit is powered on, the clock and tuner channels are being set automatically. Wait for the time to be displayed on the front display panel before turning on the unit.)

●“LOADING” blinks on the front display panel when the AC plug of the AC power cord is connected into an AC outlet and it takes approximately 50 seconds for the unit to be turned on. This is not a malfunction.