JVC DR-MV5S Advanced Recording VHS, Free Rate Function, En Advanced Recording, Tv Input, C.Reset

60 EN ADVANCED RECORDING
Free Rate Function		Advanced Recording (VHS)
To record the entire program, the unit automatically sets the
appropriate recording mode depending on the combination of the
total time of the program to be recorded and either the remaining	● Turn on the unit.
disc space or the specified recording time (from 60 minutes to 480	● Turn on the TV and select the AV mode.
minutes).	● Slide the TV/DVD switch to DVD.
8 To record the entire program within the actual remaining	● Press VHS so that the VHS lamp lights up on the unit.

disc space

Select “FR (JUST)” in a recording mode selection procedure.

●Note that this function is available only for timer programing recording ( pg. 31, 32).

8 To record the entire program by specifying the desired recording time

Select “FR60–FR360”, “FR420” or “FR480” in a recording mode

STANDBY/ON	VHS	DVD	REC
		VHS/DVD	CH

S-VIDEO	VIDEO	AUDIO
		VHS	DUBBING	DVD

selection procedure. ( pg. 28, 31, 32)

8 To record a 25-min. long daily program five times just on the same DVD disc for example

Perform “VCR Plus+® Timer Programing” ( pg. 31) procedure. Be sure to set the recording mode to “FR125” and set Weekly/Daily Rec Function to “MON–FRI” in step 6 to fit the total recording time to the whole disc space.

A: 1st

B: 2nd

Blank C: 3rd

D: 4th

E: 5th

VHS

DV IN

TV INPUT

C.RESET

CH +/–

When the same program is recorded in SP mode instead of in “FR125”, the 5th program cannot be recorded.

Blank

A:1st

B:2nd

C:3rd

D:4th

E:Blank (20 min.)

NOTES:

● You can program this unit to timer-record, regardless of the disc remaining time. When the disc remaining time is not enough,

recording may stop in the middle of a program. To avoid this, makeDISPLAY sure of the disc remaining time before setting timer programing.

(Example) If you programed to timer-record for 60 minutes in SP mode on a 120-minute disc, the disc remaining time would be 30 minutes in XP mode, 60 minutes in SP mode, 120 minutes in LP mode, 180 minutes in EP mode, and 240 minutes in FR480 mode. Timer-recording will not complete beyond these remaining times.

●The maximum recording time of “FR (JUST)”mode is the same as the

recording time of FR480 mode. When timer programing a long program in “FR (JUST)”mode on a disc whose remaining time is short, it is recommended to check the disc remaining time in FR480 mode to see if the remaining time is enough for the program.

●Even if more than one program are timer programed in “FR (JUST)” mode, only the first one is recorded.

●In order to ensure that the recording fits on the disc, this feature may leave a slight non-recorded section at the end of the disc.

●There may be some noise and sound disturbance at the point on the disc where the unit switches the mode.