74 EN SUBSIDIARY SETTINGS |
|
| |
OTHERS |
|
| |
8 RESUME — OFF / ON / DISC RESUME |
|
| |
When this function is set to “ON” or “DISC RESUME”, you can use |
|
| |
the resume function. ( pg. 46) | VHS |
| |
OFF: You cannot use the resume function. | DVD | ||
| |||
ON: You can start playback from the resume point of the placed |
|
| |
disc. |
|
|
DISC RESUME: The unit retains a memory of the resume points of the last 30 discs played back, even though they have been ejected.
NOTE:
“DISC RESUME” setting works on DVD VIDEO, VCD and already finalized
8AUTO POWER OFF — OFF / 3H
When this function is set to “3H”, the unit is turned off automatically if no operation is done within 3 hours.
Scan Mode Set
If you connect the unit and TV with Component Video Connection ( pg. 18), you can select the scan mode from two modes: Interlaced scan mode which is used in the conventional TV system, and Progressive scan mode which enables reproduction of
8Interlaced scan
PROGRESSIVE SCAN
In the conventional video system, a picture is shown on the display monitor in two halves. The Interlaced scan system places lines of the second half of the picture
8Progressive scan
Progressive scan displays all the horizontal lines of a picture at one time, as a single frame. This system can convert the interlaced video from DVD into progressive format for connection to a progressive display. It dramatically increases the vertical resolution.
ATTENTION:
●Your TV needs to be compatible with Progressive.
●Make sure that there is no disc in the unit.
●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/DVD switch to DVD.
1 Press DVD so that the DVD lamp lights up on the unit. 2 Press PROGRESSIVE SCAN for 3 or more seconds.
●Video output indicator (
) lights on the front display panel if Progressive scan mode has been established. ( pg. 13)
●Each press of PROGRESSIVE SCAN for 3 or more seconds switches the scan mode.
NOTES:
●Interlaced scan mode is the setting at your purchase.
●Interlaced scan mode might be suitable depending on video material.
●Scan mode cannot be set while menu screen is displayed.
●When the Progressive scan mode is engaged, no video signal is output from [S VIDEO OUTPUT] connector and [VIDEO/AUDIO OUTPUT] connectors.
Watch the images on VHS deck in the Progressive scan mode via component video
1 Set the
2 Press DVD so that the DVD lamp lights up on the unit.
3 Press PROGRESSIVE SCAN for 3 or more seconds.
●The video output indicator 
lights up on the front display panel.
4 Press VHS so that the VHS lamp lights up on the unit, then press PROGRESSIVE SCAN.
●“]” lights up on the unit.
NOTES:
●Be sure to engage the DVD deck in stop mode.
●During still picture in VHS Progressive Scan mode, the images may jitter, but this is not a malfunction.
