JVC DR-MV5S manual Important Product Safety, Antenna Installation Instructions, Safety First En

				SAFETY FIRST EN 3
	IMPORTANT PRODUCT SAFETY		ANTENNA INSTALLATION INSTRUCTIONS
			1. Outdoor Antenna Grounding
	INSTRUCTIONS		If an outside antenna or cable system is connected to the product,
			some protection against voltage surges and built-up static charges.
			be sure the antenna or cable system is grounded so as to provide
			Article 810 of the National Electrical Code, ANSI/NFPA 70,
Electrical energy can perform many useful functions. But improper
			provides information with regard to proper grounding of the mast
use can result in potential electrical shock or fire hazards. This
			and supporting structure, grounding of the lead-in wire to an
product has been engineered and manufactured to assure your
			antenna discharge unit, size of grounding connectors, location of
personal safety. In order not to defeat the built-in safeguards,
			antenna discharge unit, connection to grounding electrodes, and
observe the following basic rules for its installation, use and
			requirements for the grounding electrode.
servicing.
			2. Lightning
ATTENTION:
			For added protection for this product during a lightning storm, or
Follow and obey all warnings and instructions marked on your product
			when it is left unattended and unused for long periods of time,
and its operating instructions. For your safety, please read all the safety
			unplug it from the wall outlet and disconnect the antenna or cable
and operating instructions before you operate this product and keep
			system. This will prevent damage to the product due to lightning
this booklet for future reference.
			and power-line surges.
INSTALLATION			3. Power Lines
			An outside antenna system should not be located in the vicinity of
1. Grounding or Polarization			overhead power lines or other electric light or power circuits, or
(A)Your product may be equipped with a polarized alternating-			where it can fall into such power lines or circuits. When installing
		current line plug (a plug having one blade wider than the other).	an outside antenna system, extreme care should be taken to keep
		This plug will fit into the power outlet only one way. This is a	from touching such power lines or circuits as contact with them
		safety feature.	might be fatal.
		If you are unable to insert the plug fully into the outlet, try
		reversing the plug. If the plug should still fail to fit, contact your
		electrician to replace your obsolete outlet. Do not defeat the
		safety purpose of the polarized plug.
(B)Your product may be equipped with a 3-wire grounding-type
		plug, a plug having a third (grounding) pin. This plug will only fit
		into a grounding-type power outlet. This is a safety feature.
		If you are unable to insert the plug into the outlet, contact your
		electrician to replace your obsolete outlet. Do not defeat the
		safety purpose of the grounding-type plug.
2. Power Sources
Operate your product only from the type of power source indicated
on the marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or local power
company. If your product is intended to operate from battery
power, or other sources, refer to the operating instructions.
3. Overloading
Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or
electric shock.
4. Power Cord Protection
Power supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.

5. Ventilation

Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.

●Do not block the openings by placing the product on a bed, sofa, rug or other similar surface.

●Do not place the product in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

6. Wall or Ceiling Mounting

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.