JVC DR-MV5S manual Advanced Recording DVD, Instant Timer Recording ITR, Second Audio Recording

ADVANCED RECORDING EN 59

Advanced Recording (DVD)

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/DVD switch to DVD.

●Press DVD so that the DVD lamp lights up on the unit.

STANDBY/ON	VHS	DVD	REC
		VHS/DVD	CH

S-VIDEO	VIDEO	AUDIO
		VHS	DUBBING	DVD

DV IN

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-minutes interval), and shuts the unit off after recording is finished.

1 Press 7 on the unit to start recording.

2 Press 7 again to engage the ITR mode.

●On the front display panel, “0:30” appears.

3 If you want to record for more than 30 minutes, press 7 to extend the time. Each press extends recording time by 30 minutes.

NOTE:

You can only perform ITR using the 7 button on the unit.

Watch Another Program While Recording On The Unit

While recording is going on, you can watch another program on the TV by using the TV’s tuner.

NOTE:

DVD TV INPUT

CH +/–

REMAIN

DISPLAY

It is required that the remote control is set to be able to operate the TV in advance. ( pg. 70)

1 During recording, press TV INPUT to switch the TV’s input mode so that the program selected on the TV appears.

2Slide the TV/DVD switch to TV.

3Press CH +/– repeatedly to select the desired channel.

Elapsed Recording Time And Disc Remaining Time Indication

During recording, press DISPLAY repeatedly until the desired indication appears on the front display panel.

●Each time you press DISPLAY, the time indication changes as follows:

Elapsed recording time ] Disc remaining time ] Clock ] (Back to the beginning)

●You can also check the disc remaining time by pressing REMAIN while the unit is stopped or recording is in progress. The list of disc remaining times for all recording modes appears on the TV screen.

Second Audio Recording

This unit’s built-in MTS decoder enables reception of Multichannel TV Sound broadcast. To record a SAP program received, set “2ND AUDIO RECORD” to “ON”. ( pg. 73)

NOTE:

When the channel is changed on the unit;

●The “MONO” indicator appears on the screen for about 5 seconds if the program is a monaural broadcast.

●The “STEREO” indicator appears on the screen for about 5 seconds if the program is a stereo broadcast.

●Both “STEREO” and “SAP” indicators appear when a stereo program is accompanied by SAP sound.

●Both “MONO” and “SAP” indicators appear when the main audio on the monaural broadcast is accompanied by SAP sound.