JVC DR-MV5S manual Digital Audio Dubbing, En Editing, Example Dubbing to an MD

44 EN EDITING

	Digital Audio Dubbing			1 Connect the unit and a digital audio device using an optional
				coaxial cable.
				2 Place a disc on the unit and load an MD or CD on the connected
You can dub selected audio from a DVD or Audio CD disc to a
				digital audio device.
digital audio device.
				3 Select the audio to be dubbed.
However, it is not possible to dub copy-protected discs.
				4 Start playback slightly before the actual point from where you
● Turn on the TV and select the AV mode.				wish to start dubbing.
● Slide the TV/DVD switch to DVD.				5 Press 9 to pause playback.
Example: Dubbing to an MD				6 Select the input mode on the connected digital audio device.
		Recorder		7 Press 4 to start playback on the unit.
				8 Start recording on the digital audio device.
				9 Stop recording on the digital audio device. Then press 8 to stop
				playback on the unit.
				NOTE:
				There may be a discrepancy of several seconds between where you
				intend editing to start, and where it actually starts.
			Digital audio device
			(MD deck, etc.)
			Coaxial cable
			(not supplied)
			To [DIGITAL AUDIO
			OUT (COAXIAL)]

Player Rear of unit