JVC DR-MV5S manual On-screen Message, Troubleshooting En

TROUBLESHOOTING EN 83

On-screen Message
	CAN NOT FINALIZE THIS DISC
	● Finalizing is not complete since the disc may be dirty or
DISC NOT REGISTERED IN THE LIBRARY
	damaged. Take out the disc, clean it and retry. ( pg. 11, 79)
REGISTER DISC?

●A disc that is not registered in the library has been inserted. Register the disc as necessary. ( pg. 67)

INSERT DISC XXXX

●Appears when a title that has been selected in the library is not contained in the loaded disc.

CAN NOT CANCEL FINALIZATION

OF THIS DISC

●Canceling disc finalization is not complete since the disc may be dirty or damaged. Take out the disc, clean it and retry. ( pg. 11, 79)

PRESS [STOP] AGAIN TO STOP RECORDING

CAN NOT RECORD OR MAKE PLAY LIST

DELETE UNWANTED TITLES

●Recording and/or editing cannot be performed.

●The number of titles exceeds 99.

●The number of play lists exceeds 999.

SET CLOCK BEFORE TIMER PROGRAMING

●To set the timer program, the clock must be set in advance. ( pg. 21)

PROGRAM FULL

DELETE UNWANTED TIMER PROGRAMS

●You can program each deck to timer-recordas many as 8 programs. To program more, you need to cancel a timer program already set. ( pg. 35)

DISC NOT LOADED

●Operation has been attempted when a disc is not loaded, or loaded upside down. ( pg. 11)

DISC NOT RECORDABLE

INSERT RECORDABLE DISC

●When a playback-only disc or a finalized disc is loaded, 7 has been pressed. ( pg. 8)

PLUSCODE NO. ERROR

CONFIRM PLUSCODE NO. THEN RETRY

●An invalid PlusCode number has been input. ( pg. 31)

GUIDE CHANNEL IS NOT SET

SET GUIDE CHANNEL THEN RETRY

●To set the timer program using the VCR Plus+ system, the Guide Channel Number must be set in advance. ( pg. 77)

CAN NOT SET VCR PLUS TIMER PROGRAMING DURING TIMER RECORDING OR INSTANT TIMER RECORDING

●Appears when you tried to input a PlusCode number during timer recording or instant timer recording.

●During Live Memory playback, 8 has been pressed. ( pg. 52)

TIMER RECORDING COMPLETED

●Timer recording has finished during Live Memory playback.

PLAYBACK WILL STOP

THEN TIMER RECORDING WILL START

●Timer recording finished during Live Memory playback, then the next timer recording is about to begin while playback continues.

COPY PROHIBITED

CAN NOT RECORD

●An attempt has been made to record copy-protected contents.

●An attempt has been made to record copy-once contents on a disc that is not CPRM compatible, such as DVD-R.

COPY PROHIBITED

CAN NOT PLAY

●The unit has detected invalid contents at the start or in the middle of playback.

THE i.LINK DEVICE THAT YOU HAVE CONNECTED IS NOT RECOGNIZED

MAKE SURE THAT THE DEVICE IS CONNECTED PROPERLY AND POWERED ON

●An attempt has been made to start DV dubbing when a digital video camera is not properly connected to the unit.

●Check the connection. ( pg. 41)

REGION CODE ERROR

CHECK DISC

●A disc loaded cannot be played back on this unit since the region number of the disc does not match that of the unit. ( pg. 9)

UNREADABLE DISC

CHECK DISC

●When an incompatible disc is loaded, 4 has been pressed. ( pg. 9)

COULD NOT FORMAT THE DISC

CHECK THE DISC

●Formatting is not complete since the disc may be dirty or damaged. Take out the disc, clean it and retry. ( pg. 11, 78)