JVC DR-MV5S manual Edit From Another Recorder, Slide the TV/DVD switch to DVD

EDITING EN 43

	Edit From Another Recorder	Slide the TV/DVD switch to DVD.
		1 Make connections.
You can use your unit as the source player or as the recording
		A When recording on DVD deck
deck.
		1. If another recorder has no S-VIDEO connector, connect the unit’s

NOTE:	[AUDIO/VIDEO INPUT] connectors to the audio/video output
When using another recorder as the recording deck, refer to its	connectors on another recorder.
instruction manual.	2. If another recorder has S-VIDEO connector, connect the [AUDIO
A When recording on DVD deck	INPUT] and [S-VIDEO INPUT] connectors to the audio and S-video
	output connectors on another recorder.
Your unit	● If connecting a unit with an S-VIDEO connector, it is recommended to
	use an optional S-Video cable to minimize picture degradation while
	editing.
	B When recording on VHS deck

Recorder

TV receiver

Another recorder

1.Connect the unit’s [AUDIO/VIDEO INPUT] connectors to the audio/ video output connectors on another recorder.

2 Press VHS/DVD on the unit repeatedly to select the recording deck.

3 Press CH +/– to select “L-1” when using this unit as the recording deck.

For DVD deck

●Set “REAR AUX L-1” to “VIDEO” for the VIDEO input connector, or “S-VIDEO” for the S-VIDEO input connector, depending on the connector being used. ( pg. 73)

4 Press REC MODE repeatedly to set the recording mode.

5 Engage the Play mode of the source player.

6 Engage the Record mode of the recording deck.

7 Stop recording on the recording deck, then stop playback on the source player.

Player

BWhen recording on VHS deck

NOTES:

● All necessary cables can be obtained from your dealer.

● When you use this unit as the source player for editing, be sure to set “SUPERIMPOSE” to “OFF” before starting. ( pg. 73)

● It is also possible to use the audio/video input connectors on the front

Your unit

panel. In that case, select “F-1” in step 3.

Recorder

TV receiver

Another recorder

Player