JVC DR-MV5S Timer Programing, VCR Plus+, Weekly/Daily Recording, Timer Recording En, Cancel, rtwe

TIMER RECORDING EN 31

VCR Plus+	®	Timer Programing	1 Press DVD or VHS to select the deck on which you want to
			perform timer programing.
			2 For DVD deck
			Load a recordable disc.
			For VHS deck
You can program each deck to timer-record as many as			Load a cassette with safety tab intact.
			3 Press VCR Plus+ to access the VCR Plus+ screen.
8 programs up to 30 days ahead.
With the VCR Plus+ system, timer programing is greatly simplified			4 Press the number buttons to	VCR Plus+ PRGM
because each TV program has a corresponding code number			enter the PlusCode number of a			PLUSCODE NO. 1 2 3 4
which your unit is able to recognize.			program you wish to record, then			DATE	START		STOP	CH
You can use the remote control to enter the PlusCode number.			press ENTER.
			● If you have made a mistake, press		DAILY/WEEKLY		REC MODE		NAME
● Make sure that the unit’s built-in clock is set properly.			CANCEL and input the correct
							SP
● Turn on the unit.			number before you press ENTER.	1	2	3	OK
● Turn on the TV and select the AV mode.			● To clear all entered numbers at a					ENTER VCR PLUS+ CODE WITH [0 - 9] KEYS
				4	5	6
				7	8	9		THEN PRESS [ENTER]
● Slide the TV/DVD switch to DVD.			time, press CLEAR (8).		0
			● If the number you entered is
			invalid, “PLUSCODE NO. ERROR CONFIRM PLUSCODE NO.
			THEN RETRY” appears on the TV screen. Input a valid PlusCode
			number.
			● If “GUIDE PROGRAM IS NOT SET” appears on the TV screen, set
VHS			Guide Channel numbers manually. ( pg. 77)
		DVD	● When “PROGRAM FULL DELETE UNWANTED TIMER PROGRAM”
			appears on the TV screen, you need to cancel some of the reserved
			programs. ( pg. 35)
0 – 9			5 The PlusCode number you entered and the matching timer-
			recording information are displayed on the TV screen. Check the
			program data.
CANCEL			● To cancel this setting, press RETURN.
VCR Plus+		TIMER	IMPORTANT:
			Make sure the channel position number you wish to record is
ENTER			displayed; if not, see “Changing VCR Plus+® Setting” ( pg. 77) and
			set the Guide Program number correctly.
		rtwe
			6 Press w e to select the desired recording option as required.
		RETURN
			Press rt to select the desired setting, then press ENTER.
			● “STOP” (To advance/go back the stop time by 30 minutes, press and
			hold rt).
		CLEAR (8)	● “DAILY/WEEKLY” ( below “Weekly/Daily Recording”)
			● “REC MODE” ( pg. 29, 30, “Recording Mode”)
			● “NAME” ( pg. 64, “Modify Title Name”) (DVD deck only)
			7 Press ENTER to access the Program Confirmation screen.
			8 Press ENTER to complete timer programing.
IMPORTANT:			● To program another timer, repeat steps 3 – 8.
If you have moved to a different area or if a broadcasting station’s			● If “PROGRAM OVERLAPPED” appears on the TV screen, see
channel number has been changed, the wrong channel number will			page 35.
be displayed on the VCR Plus+ program screen in step 5. When this			9 Press TIMER # to engage the unit’s timer mode. The DVD timer
happens, set the correct Guide Channel number for that station.			lamp lights up on the unit and the unit is automatically turned off.
( pg. 77, “Changing VCR Plus+® Setting”)			● To disengage the timer mode, press TIMER # again.
Cable Box and DBS Receiver Users (DVD Deck Only)			Weekly/Daily Recording
To timer-record a satellite broadcast using the VCR Plus+			You can record programs with one of the following weekly/daily
system:
			timer settings.
A Perform “VCR Plus+® Timer Programing”.
B Set the cable box or DBS receiver to the appropriate channel			WEEKLY: Select to record a weekly program.
before the selected program begins.			MON–FRI: Select to record a daily program from Monday through
C Leave the cable box or DBS receiver’s power on.			Friday.
NOTES:			MON–SAT: Select to record a daily program from Monday through
			Saturday.
● There may be cases that the VCR Plus+ Timer Programing function			SUN–SAT: Select to record a daily program from Sunday through
prolongs the stop time of the programing.			Saturday.
● When two successive programs are recorded on a DVD-RW disc with

the VCR Plus+ Timer Programing function, the beginning of the second one may be left off the recording.

● VCR Plus+ Timer Programing is not possible on the discs used exclusively for On-Disc Timer Programing.

● If the copy limited program is received during timer-recording, the unit enters Record Pause mode. Recording starts again if it is switched to a recordable broadcast during the time you programed.

● To record the programs received by cable box or DBS receiver, record on the DVD discs. For details, refer to “Cable Box and DBS Receiver Users (DVD Deck Only)” above.