„ Status Screen in VTR Mode | JVC GY- HD101, GY-HD100 guide

CONTROLS, INDICATORS AND CONNECTORS

Status Screen in VTR MODE

No.	Item	Contents
1	VIDEO FORMAT display	Displays the video format recorded on the tape when in VTR mode.
		You can switch this display ON/OFF using the VIDEO FORMAT item on the LCD/VF [2/3] menu screen.
		X See page 72.
		MEMO
		This camcorder cannot play back or output tape recorded in HDV 1080i format. “INVALID TAPE!” is dis-
		played in the event display area 4.
2 Time code (TC) and user’s bits		Displays the time code data being recorded (hour, minute, second, frame) when in VTR mode.
	(UB) display	You can switch this display ON/OFF using the TC/UB item on the LCD/VF [2/3] menu screen.
		X See page 72.
		You can select to display either the time code or the user’s bits using the TC DISPLAY switch in the LCD
		door.
3	Remaining tape time	Remaining tape indication (displayed in 1-minute steps)
		This indicator blinks when remaining tape time is equivalent to less than 3 minutes.
		Whether or not to display this item is set with the TAPE REMAIN item on the LCD/VF [1/2] menu screen.
		X See page 72.

*When inserting a brand-new tape, the remaining tape time is not indicated. When the tape has been run, the indication will appear.

*The remaining tape indication is to be used only as a guide.

*When the unit is used at low temperatures, it may take a while before the indication of the remaining tape time appears.

4 Event display

Displays messages related to VTR operations. X See page 85-86.

5Audio sampling frequency in- The audio sampling frequency used for the recording is displayed during playback.

	dication	(32 K, 48 K, 44.1 K)
6	Audio level meter indication	Displays the audio level meters during playback.
		Whether or not to display this item is set with the AUDIO item on the LCD/VF [2/3] menu screen.
		X See page 72.

7	VTR mode indication	Indicates the VTR operation status
		STBY, STOP, PLAY, REC, FF, REW, FWD, REV, STL, - - - (No tape loaded), SLOW: During variable play-
		back in forward direction (Displayed when using non-linear editing software.)
		(SLOW+1: About ×0.1 speed, SLOW+2: About ×0.2 speed, SLOW+3: About ×0.5 speed)
		During variable playback in reverse direction (Displayed when using non-linear editing software.)
		(SLOW–1: About ×–0.1 speed, SLOW–2: About ×–0.2 speed, SLOW–3: About ×–0.5 speed)

8	Time/Date indication	Recorded data are displayed during playback, fast forward, and rewind.
		During recording, the data from the IEEE1394 connector is displayed.
		(GY-HD100U/GY-HD101E only)
		Whether or not the date and time should be displayed and the display style are set on the TIME/DATE
		menu screen. X See page 76.
		When the date and time have not been set, the following indication appears.
		- -/- -/- - - -: - -: - -

9	Voltage indication	(Example) 7.0V : Indicates remaining battery level in 0.1V steps.

0	Audio Lock indication	Displayed when the audio signal from DV recording or playback is locked to the video signal.